Rooftop Safety
  • About Us
  • Resources
  • FAQs
  • Contact

Toronto Community Housing Upgrades Rooftop Safety to Meet TSSA Regulations

Toronto Community Housing Upgrades Rooftop Safety to Meet TSSA Regulations

Toronto Community Housing

The Toronto Community Housing is the largest social housing provider in Canada and the second largest in North America. They are wholly owned by the City of Toronto and operate in​ a non-profit manner. Toronto Community Housing has 2,100 buildings​ and 50 million square feet of residential space, which represent a $9 billion public asset.

Toronto Community Housing homes and communities are in 106 of Toronto’s 140 neighborhoods, providing homes to nearly 60,000 low and moderate-income households. Their 110,000 residents come from many different backgrounds with a diversity in age, education, language, mental and physical disability, religion, ethnicity and race.

Eliminating Rooftop Hazard

Rooftop Safety

The Toronto Community Housing was looking for a budget friendly solution to meet the strict rooftop safety requirements of the TSSA. In order for the TSSA to service both the mechanical penthouses and electrical transformer located on the roof, a safe passage would need to be created from both the north and south wing roof access points to the mechanical penthouse. With the roof having no guardrail or parapet at least 42” in height, the full length of the walkway (on both sides) would require guardrail system to eliminate any rooftop hazards.

Skyline Ladders

Compliant Safety Solution

The Toronto Community Housing was looking for a long lasting and non-penetrating solution that would be used in conjunction with their current paver walkway system. It was important that the units be tested by a third party, ensuring compliance, while being aesthetically pleasing. A non-penetrating RoofBarrier system was the perfect solution for their needs. Not only does the Skyline Group RoofBarrier system surpass Canadian rooftop safety standards, it’s galvanized steel material will ensure it looks new even after years of usage. Unique to the Skyline Group RoofBarrier system, it’s modular design and lightweight material made it easy and cost effective for the general contractors during installation. While also making it a budget friendly solution.

Looking For A Rooftop Safety Solution That Meets Hurricane Loadings

Looking For A Rooftop Safety Solution That Meets Hurricane Loadings

Bristol Myers

Bristol Myers Squibb believes in the power of science to address some of the most challenging diseases of our time. Their focus on these unmet needs comes during a remarkable time when unprecedented scientific breakthroughs are advancing the treatment of disease as never before in human history.

They work every day to transform patients’ lives through science. Each day, their employees worldwide work together to meet the needs of their patients. Bristol combines the agility of biotech with the reach and resources of an established pharmaceutical company to create a global leading biopharma company powered by talented individuals who drive scientific innovation.

With numerous advancements in oncology, hematology, immunology, and cardiovascular disease, they are dedicated to helping patients prevail over serious diseases.

Rooftop Safety

Safety Challenge Requiring Experience

The 460,000 square foot facility on 33 acres produces biologics medicines and Coumadin. Bristol reached out to our rooftop safety specialists to better understand their rooftop safety needs and ensure compliance on a crowded roof. With various large HVAC units, ducts, pipes and more, Bristol was looking to ensure that these RTUs (rooftop units) could be easily maintained. There are many rooftop guardrail, crossover and access ladder providers in North America that can help with meeting safety compliance, although the company was looking for;
  • A modular solution that is quick and easy for the contractor to install.
  • One single supplier that can help provide the required roof safety products and be actively involved in delivering stamped drawings for the basis of design.
  • Has experience working on large-scale design projects, as this project was valued at over $500,000.
  • Can incorporate an aesthetically pleasing guardrail design, limiting visibility from the ground.
  • Most importantly, be certified by a third party to meet hurricane loading requirements. While still requiring a non-penetrating solution to minimize roof damage, repairs, and potential leakage.

Transforming Rooftop Safety

Our team proposed a solution comprised of various galvanized non-penetrating 5003 Series RoofBarrier systems, aluminum crossovers and access ladders. In some areas of the roof, where ducts were located on the edge of the roof, we proposed a fixed guardrail system alongside the parapet. Here is what our solution was able to solve.

  • The 5003 series is considered to be an architectural guardrail. It is a non-penetrating self-ballasted guardrail comprised of curved handrails, making the bars invisible when at ground level.
  • Its modular design and lightweight material ensured a quick and easy installation. While also offering the opportunity to grow their safety needs further, as the roof plans expand to meet production requirements.
  • Our company prides itself on being a one-stop shop to making rooftop safety access and compliance easy. With thousands of projects under our belt and years of experience working with contractors, engineers, consultants and building owners, Bristol felt at ease working with our height specialists.
  • Create a safe passage around the roof, along with to and from each roof access point.
  • We were one of the only suppliers to test this custom non-penetrating guardrail system with up to 60-mile winds with a third party to meet hurricane loading requirements for the area.

5 Reasons Why You Would Select A Non-Penetrating Rooftop Guardrail System

5 Reasons Why You Would Select A Non-Penetrating Rooftop Guardrail System

Both penetrating and non-penetrating systems will keep roof workers (contractors, maintenance staff, and service teams) safe while working on a commercial flat roof, minimizing the risk of injury. Why do facility managers and roofing contractors prefer installing a non-penetrating roof barrier system? Here are 5 common reasons why you would select a non-penetrating rooftop guardrail.

Rooftop Safety

Flexibility

A non-penetrating solution gives you the flexibility to install the system wherever you need it on the roof, regardless of any load barring or structural concerns. This type of system also enables you to reuse the same equipment once a roof is reroofed. Yes, you can do so as well with a fixed guardrail, although the simplicity of just moving the system to the side for a repair to the roof and putting it back in place without making more holes is usually underestimated.

Quick & Easy While Reducing Costs

Our line of RoofBarrier guardrails require less installation time and labor due to their modular design! For contractors, this means you’ll be saving on installation time, labor, and costs. If you are a facility manager, the reduction in labor will contribute towards reducing your overall budgetary requirements.

No Roof Repairs Required

If you plan on fastening the system to the roof, once the installation is complete you will need to repair and/or reseal those sections of the roof. Often the cost of resealing and repairing the flat roof is not taken into consideration when choosing between a fixed guardrail vs non-penetrating guardrail solution.

No Structural Concerns

At times, due to where the barrier needs to be located in order to ensure rooftop safety compliance, fastening a guardrail may not be an option. We have also come across this scenario when working on older buildings and/or historical sites where preserving the site is of utmost importance.

Modular – Growing with Your Roof Needs

As your rooftop grows in either square footage and/or safety requirements, you may require an upgraded HVAC system to meet your growing needs. With a non-penetrating guardrail, you can move the system to a different location on the roof with ease or add onto an existing unit with basic hand tools, ensuring rooftop safety compliance.

Summary

Ultimately, it comes down to how quick and easy the installation process is with a modular non-penetrating guardrail system. With a non-penetrating system there is no need for any re-work to be done to the roof after installation is complete, unlike fixed systems where you need to repair and reseal the roof, potentially voiding your roof warranty.

Is A Non-Penetrating Guardrail System Non-Permanent?

Is A Non-Penetrating Guardrail System Non-Permanent?

A non-penetrating rooftop guardrail or barrier system is made up of uprights, top rails, mid rails, weighted base plates, and various clamps and screws. They are non-penetrating because the base plates that enable the posts and rails to freely stand upright are weighted, thus not requiring the installer to fasten the uprights to the roof.

Skyline Ladders

Having a non-penetrating guardrail is indeed a permanent rooftop safety solution. Both penetrating and non-penetrating systems will keep roof workers (contractors, maintenance staff, and service teams) safe while working on the roof, minimizing the risk of a fall-related injury. Our line of rooftop guardrail solutions has remained on roofs with minimal maintenance requirements for 10+ years. Just like guardrail solutions that are fastened to the roof, non-penetrating systems will stand the test of time. With that being said, why do facility managers and roofing contractors prefer installing a non-penetrating roof barrier system? Here is why you would choose a non-penetrating rooftop guardrail;

  • Gives you the flexibility to move the system, enabling you to reuse the same equipment once a roof is reroofed.
  • Our line of RoofBarrier guardrails require less installation time and labor due to their modular design! For contractors, this means you’ll be saving on installation time, labor, and costs. If you are a facility manager, the reduced labor requirements will help towards reducing your overall budgetary requirements.
  • Depending on the design and material of your roof, fastening a guardrail may simply not be an option.
  • If you plan on fastening the system to the roof, once the installation is complete, you will need to repair and/or reseal those sections of the roof. More often than not, the cost of resealing and repairing the commercial roof is not taken into consideration when choosing between a penetrating vs non-penetrating guardrail.
  • Unlike others, our array of roof barrier products are modular in design, making it extremely easy to set up and install on-site. All you need are a few simple hand tools.
  • With each standard RoofBarrier base plate weighing 40 – 100 lbs, non-penetrating systems will withstand sunshine, high winds, rain and snow.
  • If your yearly rooftop inspection/audit yields maintenance and/or repairs, having a modular non-penetrating solution will facilitate the process. Furthermore, making it simple to ensure rooftop safety compliance.
  • Meets and surpasses North American rooftop safety regulations.

Ultimately, it comes down to how quick and easy the installation process is with a modular non-penetrating guardrail system. There is also no need for any re-work to be done to the roof after installation, unlike fixed systems where you need to repair and reseal the roof, potentially voiding your roof warranty.

5 Common Rooftop Safety Hazards

5 Common Rooftop Safety Hazards

While working on rooftops safety is a priority! With advancements in infrastructure and the need for businesses to evolve their physical space, flat roofs across the country are becoming crowded. These rooftop units (RTUs) and the crowding that occurs are a cause for concern. Today’s rooftops are presenting various potential hazards. This article will take you through the 5 most common hazards we encounter on a regular basis.

Rooftop Safety

RooF Edge Awareness

Whether you have all the time in the world to finish the project at hand, or just a few minutes before closing time to get home, there is always a risk we lose track of where we are on the roof. Roof edge awareness is ensuring that you are aware of how close you are to the edge of the roof at all times. At any point in time, if you need to travel close to the roof’s edge to get to an area of the roof, or conduct service/work while remaining close to the edge of a roof, a permanent safety solution like a roof barrier may be required. You also have the option of setting up a warning line system to help roof workers to quickly identify a hazard, whether that hazard is the edge of the roof or a skylight.

Weather & Visibility Concerns

Always keep a look out for changes in weather that can reduce visibility while on the roof. Rooftop surfaces like TPO membranes can become very slippery when wet, at the same token they can also blind you while working on a sunny summer day. Depending where you are located in the country you might also be subject to high amounts of snow, keep in mind that snow can easily cover access points and hazards, like skylights, overnight. Ensure you always have safe passage, regardless of the weather, to and from your rooftop access points.

Skylights, Hatches, and Other RTUs

As a safety precaution, you should always take the time to review the roof plan prior to stepping onto the roof. On the roof plan you will find the location of various rooftop units you are possibly looking to service that are close to the edge, along with vents, ducts, gas lines and more. Knowing this in advance will help ensure you take the safest path to your destination on the roof, while being aware of where the roof guardrail systems are located. In the event you are required to work close to the edge of the roof you will at least know if it is a safe environment.

Often, a roof safety hazard is only brought to the attention of a building owner once a contractor or service provider visits the roof to service an RTU, like a HVAC system. At which point it becomes an urgent request so that maintenance can continue, as work may be temporarily suspended until a roof guardrail is installed.

Roof Access Ladder Placement

There is a perception that many rooftop fall accidents and injuries occur on the roof itself, but the reality is that these accidents often occur when attempting to access the roof. With that comes training, employees who require routine access to the rooftop should undergo training to safely ascend and descend.

Before using a fixed hatch or roof access ladder, it is important to check the integrity of the ladder and ensure it’s safe to climb. No matter if it is the first time and only time you require to access the ladder or it’s a daily routine for you, reviewing points of failure is about putting safety top of mind. A fixed access ladder should have its feet secured to the wall and possibly the ground, with the top of the ladder being secured to the roof. Annual fixed access ladder inspections should be well documented and help to ensure your fixed access ladder is always safe.

Roof Stability and Structure

You may be working on the roof due to its degrading structure, working towards improving its stability and integrity. Assuming you have assessed the roof structure and are standing on a compliant and safe roof. One thing to note, and especially applicable to older structures, it is important to assess the roof and understand its load ratings and structure. Doing so will help you better understand what can and cannot be installed as a safety solution to the roof. Some solutions can be manufactured in steel, adding a lot of weight to certain parts of the roof, while also requiring a secure location to fix the solution. We have encountered many projects where the structure of the building yields an aluminum lightweight non-penetrating modular roof guardrail, like our Roofbarrier solutions.

How about changes in elevation on the roof? Portions of the rooftop may be higher and/or lower than the roof access point. Such drops in roof elevation can also include narrow walkways, making it that you are always walking or working near a fall hazard. These environments will need careful consideration as there are a mixture of crossover ladders, access ladders, walkways and guardrails that may need to be considered when creating a safe working environment.

Don’t discover safety by accident! Reach out to your rooftop or height safety provider to learn how you can create a safe and compliant rooftop environment.

Choosing the Right Base Plate for Your Rooftop Guardrail System

Choosing the Right Base Plate for Your Rooftop Guardrail System

What is a Base Plate?

Baseplates hold up the guardrail posts of non-penetrating free-standing roof barrier systems that can be used in a temporary and/or permanent installation. Their weight, material, and profile are all considered when looking to protect your flat commercial roof from a fall hazard.

Base Plate For Your Rooftop Guardrail System

Material & Weight

The material and weight of a base plate go hand in hand. You are essentially looking for a base plate made of heavy material to protect you from a potential fall. Otherwise, if the base plates are lightweight, the barrier itself will move with ease when trying to stop you from falling. Especially when considering that the average worker is carrying various heavy tools with them, adding to the stress on the guardrail.

Base plates are commonly made from galvanized steel or powder-coated steel. It’s important to remember that your roof is subject to high winds, rain, and possibly snow, depending on where you live. The base plates are a critical component in creating a safe and compliant guardrail solution; if they are made of a material that degrades over time, you will not be able to guarantee safe passage around the roof. Therefore, you want to ensure your steel base plates are coated with an anti-corrosive layer, also minimizing the potential of rust leaching onto the roof itself and causing damage.

For example, let’s say you were to use heavy paver blocks… With various temperature changes, pavers tend to crack, eliminating the support you once thought you had. It also breaks without warning, only noticeable during your yearly roof safety inspection.

There is no set rule in terms of how heavy a base plate should be. Our standard base plates are either powder coated or galvanized and weigh 40 – 100 lbs each. If you use a cantilever style design where the weighted base plates are extended a few feet from the post, you can use a lighter weight like our 40 lb base plates.

Profile & Design

Above, we talked about base plates potentially damaging the roof. That is correct; if you have a membrane roof you will want to ensure that the steel base plates do not damage the roof. Which is why all of our heavy base plates include a thick rubber mat on the bottom, ensuring your roof remains looking new.

Moving around 100-pound base plates can get quite tiresome. Look out for base plates that include ergonomic handles to help lift and carry them safely across the roof. This is especially important if you are considering a temporary installation.

One of the most underrated features of a base plate is its profile. Our base plates are “low-profile”; they are manufactured slim and wide to reduce any chance of tripping. This is especially important if you are working during the winter months. Fresh snowfall will cover skylights, roof edges, access hatches, ducts, and your base plates. A trip can pose a severe risk of injury.

Can I Interchange Base Plates?

It is not advised to purchase your guardrails from one manufacturer and your base plates from another. Likewise, when looking to replace your base plates, it is best to consult the manufacturer of your guardrail system. They may look like they fit and have a very similar design, although it may not be safe. 

When To Consider a Rooftop Warning Line System Versus a Safety Guardrail

When To Consider a Rooftop Warning Line System Versus a Safety Guardrail

Rooftop Safety
Roof Guardrail

What is a Rooftop Guardrail or Barrier System?

First, let’s start with what is a rooftop guardrail/barrier. Unlike a warning line or bump line system, a guardrail system is intended to prevent roof workers from an injury or fatal fall. A guardrail is a form of fall protection referred to as a roof barrier, protecting personnel working near the roof edge. It comprises of uprights, top rails, mid rails, weighted base plates, and various clamps and screws. Not having a parapet on the roof poses a risk of tools falling to the levels below. In these cases, you will find that some of these roof barrier designs include a toe board.

Roof guardrails are manufactured in various materials and can be either fixed to the roof or non-penetrating, freely standing with a weighted base plate. Both options are permanent solutions, but with the non-penetrating design, you have the flexibility to move the guardrail around the roof with ease. This is becoming a popular solution as it requires minimal on-site setup time, especially if you are looking at our modular RoofBarrier system.

What is a Bump Line or Warning Line System?

Warning barriers and bump lines are intended to visually warn roof workers of a potential rooftop injury or fall. Ultimately, only alerting you not to pass the warning line without additional safety equipment. Bump lines are usually set up around the work area at least 2 meters (6 feet 6 inches) from the hazard. Common hazards would include a nearby roof edge, an open access hatch, and a glass skylight. These systems are commonly made up of uprights, a weighted base plate in order to be freestanding, a chain or rope linking the uprights together, and several high visibility flags that are not too far apart.

When a work area is enclosed, and a bump line is installed in a manner that meets local regulations, the site is considered a safe work environment, enabling personnel to work freely without a permanent guardrail in place. In essence, the warning system acts as a safety perimeter for all those working on the roof. Please note that each region differs in how a bump line should be used, along with how many posts are required for a given length of space. Always refer to your local rooftop safety guidelines or speak to a height safety specialist for more information. Keep in mind that anyone outside the area working less than 2 meters from a hazard must use appropriate fall protection on the rooftop, possibly
requiring a safety system like our RoofBarrier system.

When Should I be Considering a Warning Line System?

Fixed Aluminum Guardrail
RoofLine Series

Warning line systems are traditionally used and designed to access areas of a commercial flat rooftop nearing the roof edge. The bump line system would be placed 2 meters from the roof edge, warning personnel of a nearby hazard. The design, like many permanent guardrail systems, is freestanding. This eliminates the requirement to penetrate the roof, ultimately exposing your building to leaks and extra labor in order to patch the roof.

In many scenarios, the work that is being done on a roof is near the edge. With advancements in building technology, we are finding that roofs are becoming more crowded than ever before. For example, many HVAC units are installed only feet or inches away from the roof edge, with gas lines, ducts and other RTUs taking up most of the space. To maintain those units regularly, building owners must meet safety compliance codes and ensure safe passage to and from the HVAC unit. Along with creating a secure and safe site for maintenance to be done around the HVAC unit. Being so close to the roof edge makes a bump line not feasible and not compliant. Now, what if the HVAC unit is located in the middle of the roof, far away from the roof edge, but the pathway to get to the HVAC unit is hugging the edge of the roof? The HVAC working area itself wouldn’t require a permanent barrier-type solution, enabling the use of a bump line system. However, the pathway itself would need a guardrail on the side nearing the roof edge to ensure a safe and compliant environment.

The Verdict

Whether you’re a building owner, contractor, engineer, consultant, or supplier of safety equipment, we have an obligation to make sure we provide a safe environment for our colleagues, family, and friends to work in. If you are unsure about rooftop safety regulations in your region, it is important that you consult your company’s safety official and/or a third party that has compliance experience. Nobody wants to discover safety by accident!

Lansdowne Heritage Horticulture Building Keeps its Charm with A Safety Guardrail and Access Ladder

Lansdowne Heritage Horticulture Building Keeps its Charm with A Safety Guardrail and Access Ladder

Ottawa Heritage Building

Lansdowne Park is a world class attraction that blends modern amenities, courtyards, heritage buildings and green space. This urban public destination, situated right in the heart of Ottawa city, offers programs on a year-round basis. It features events and activities for all ages, regardless of the season.

Located in Ottawa’s Lansdowne Park, the Horticulture Building was erected over nine weeks in 1914 to serve as a venue for the Central Canada Exhibition’s annual horticulture show. It replaced an earlier Horticultural Hall built-in 1899. For 75 years, it was also used as a curling venue during the winter. The Horticulture Building is the only building in Ottawa designated under Part IV of the Ontario Heritage Act three times and to have had its designation revoked twice.

The design of the Horticulture Building is attributed to architect Francis Conroy Sullivan (1882-1929), although the drawings were prepared by the office of architect Allan Keefer (1883-1952), another local architect. The exact roles played by each architect are unknown.

Keeping The Building's Charm

The Horticulture Building houses a restaurant and public reception spaces that are rented out for both private and community events. The City of Ottawa was looking for a non-intrusive means of bringing the building’s rooftop up to today’s safety standards. The rooftop HVAC systems are located close to the roof edge, ultimately making it a high-risk rooftop hazard when looking to have the units maintained. Walking on the TPO membrane roof, even when over 6 feet away from the roof edge, isn’t ideal as the material is quite slippery when wet, creating a potential fall hazard all year round. Keeping the history of the building intact while meeting the building load requirements was a must, as no upgrades to reinforce the roof of the building would be approved.

A Non-Intrusive Roof Safety Solution

The architect and general contractor reached out to our team of rooftop safety experts to conduct an on-site safety audit. Once the on-site visit was completed the team recommended an aluminum safety solution comprised of various guardrails, walkways, and a fixed ladder system. The rooftop safety solution yielded a;

  • Quick and easy installation with its modular design.
  • Lightweight design and material, eliminating the need for extra support to meet the load requirements.
  • Non-slip raised walkway, creating a safe passage to and from the HVAC units.
  • Non-corrosive aluminum material, ensuring the solution looks like new for years to come.
  • Non-penetrating rooftop system, keeping the building’s heritage intact.

Attabotics Reaches New Heights with Skyline Access Ladders

Attabotics Reaches New Heights with Skyline Access Ladders

Attabotics

Attabotics is the world’s first 3D robotics supply chain system built from the ground up for each item picking. Attabotics replaces the rows and aisles of traditional fulfillment centers with a patented storage structure and robotics shuttle that utilizes both horizontal and vertical space, reducing a company’s warehouse needs by 85%. By empowering retailers, grocers, and eCommerce providers to place fulfillment centers near high-density urban areas, Attabotics helps create jobs and decrease carbon emissions by closing the last-mile delivery gap. Essentially, Attabotics automates the fulfillment needs of digital commerce globally!

Interior Height Safety Concerns

Gardcheck Access Ladder

With Attabotics making use of every inch of a warehouse, their storage systems have no height limitations. As a result, when looking to manually access sections of the storage system, Attabotics reached out to the height safety experts at Skyline for a lightweight modular access ladder system that can easily integrate into their custom storage solutions. Ease of integration and installation was important, but they also wanted an access ladder that still looked aesthetically pleasing alongside their racking system.

Lightweight Modular Access Ladder

Attabotics incorporated the 7000 Series fixed access ladders as part of their design. The 7002 fixed ladder is made of a lightweight and maintenance-free aluminum, carrying with it an always new look and finish. The solution also included a cage wrapping the front of the ladder, with a short walkway and guardrail to ensure safety at all times. With the access ladders being installed within the interior walls of the warehouse, employees would have 24/7 access to climbing the ladder. As a result, we incorporated an aluminum door that would only allow authorized personnel access up the ladder. Not only are these access ladders compliant in meeting height regulations across North America, but their modular design makes it quick and easy to finalize the installation of Attabotics’ racking system.

“The Donut Box” Stadium Takes Safety to New Heights

“The Donut Box” Stadium Takes Safety to New Heights

Hamilton Tim Hortons Field

The Tim Hortons Field, nicknamed “The Donut Box”, is a multi-purpose stadium in Hamilton, Ontario, Canada. Built as a replacement for Ivor Wynne Stadium, the Tim Hortons Field is primarily used as a sports venue for football and soccer. It is the home of the Hamilton Tiger-Cats of the Canadian Football League (CFL) and Forge FC.

The stadium currently seats approximately 24,000 fans, potentially boosting capacity to more than 40,000 seats for special events.

Access Ladders on Stadium

Stadium Floodlights Require Safe Access

When watching a late-night game or outdoor event at the Tim Hortons Field, the one thing we can’t live without is outdoor lighting. The outdoor high-intensity floodlights help the 20,000 plus fans see the action live. If you’re wondering, the illumination at a sporting event can be anywhere from 25 to well over 100 feet tall. The Tim Hortons Field has its lighting suspended at approximately 144 feet!

When the Tim Hortons Field was looking for a safe means of accessing their stadium floodlights for servicing, they reached out to our team of height safety experts to ensure safety compliance with local regulations.

Access Ladders on Stadium
Access Ladders on Stadium

Modular Aluminum Lifeline Ladders

The contractor reached out to our team of height safety experts to learn how they can go about adding four 43-foot access ladder systems to reach the stadium’s floodlights for routine maintenance. Once construction of the stadium was complete, a site visit was conducted, along with a review of the building and floodlight tower designs. Our team of safety experts recommended an aluminum fixed access ladder that included an integrated lifeline system. A lifeline allowed for free movement up and down the entire height of the ladder, eliminating the need to reconnect to new tie-off points while ascending or descending. Climbing up and down four 43-foot access ladders with all of your tools, sometimes requiring multiple trips, is no walk in the park. The lifeline system offered a safer solution while drastically reducing the time needed to maintain the floodlights. The four central ladder systems also included a base platform and a mid-way rest platform.

Based on the contractor’s experience working with our team on the four main stadium floodlights on the east side of the field, four additional systems were installed to access the lights above the “presenter box”. These lights were much lower in height and were accessed with our modular aluminum cage-style fixed access ladders.

All the access ladders provided were constructed using high-grade aluminum, incorporating a profiled rung design with size and spacing meeting ladder codes and regulations. The efficient modular design of the ladder made it extremely easy to ship and simplified the overall installation process for the contractor, saving the stadium time and money.

roof railing

TÉLÉCHARGER

Ce site est protégé par reCAPTCHA et le Google Politique de confidentialité et Conditions d’utilisation  appliquer.
roof railing

DOWNLOAD

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

roof railing

DOWNLOAD

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

roof railing

DOWNLOAD

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.