• Contact

Why 3 Meters Matters: The Critical Threshold in Rooftop Safety

When it comes to fall protection measures in Ontario and across Canada, there’s one number that safety professionals, regulators, and insurers consistently highlight: 3 meters. But why is this seen as a critical threshold, and what are your obligations in protecting workers operating at this height? We address these questions and more in the latest learning resource from Skyline Group.

At first glance, 3 meters (approximately 10 feet) may not seem dangerously high. It’s roughly the height of a single-story roof. Yet time and again, research and real-world incidents show that falls from this height can be fatal or cause life-altering injuries. For building owners and property managers in Ontario, understanding the legal and safety implications of the 3-meter threshold isn’t just good practice — it’s a legal and ethical obligation.

Why is 3 Meters Seen as a Threshold in Height Safety?

The reason 3 meters is a critical benchmark is simple: a fall from this height generates enough force to cause serious injury or death. Numerous sources, including guidance from WSPS confirm that even falls from as little as 2.5–3 meters can result in spinal damage, broken limbs or traumatic brain injuries — especially on hard surfaces like concrete or asphalt.

To put it into context, a worker falling from a 3-meter height could hit the ground in under a second, with an impact force of over 5,000 newtons — more than enough to break bones or worse.

What the Law Says in Ontario and Canada

In Ontario, rooftop fall protection is mandated by law. The Occupational Health and Safety Act (OHSA) and its associated regulations lay out clear expectations for property owners and employers.

Under Ontario Regulation 213/91, Section 26.1(2), fall protection is required when a worker is exposed to a fall of more than 3 meters (9.84 feet):

“A worker shall be adequately protected by a guardrail system or by a fall protection system if he or she is exposed to a fall of more than 3 metres…”

Further, under Section 25(2)(h) of the OHSA, employers and property owners must:

“…take every precaution reasonable in the circumstances for the protection of a worker.”

This duty extends not just to employees, but also to contractors, subtrades and any authorized personnel accessing the rooftop.

Nationally, Canada’s federal labor code and the Canadian Standards Association (CSA) reinforce this 3-meter threshold across industries and provinces, recommending fall protection systems once work exceeds this height.

The Misconception: “It’s Not That High”

One of the most common — and dangerous — assumptions building owners make is underestimating lower-height risks. Because 3 meters doesn’t look or feel like a dramatic height, it’s often deprioritized. But the reality is that falls from 3 meters result in serious injuries every year — especially when guardrails, access ladders, or walkways are missing, unsecured or non-compliant.

According to the Canadian Centre for Occupational Health and Safety (CCOHS), falls are one of the leading causes of workplace injuries. Slips, trips, and falls represent over 40% of lost-time injuries — many of them from relatively low heights.

How Building Managers Can Protect Workers at 3 Meters

Technicians in high-visibility safety gear inspecting rooftop HVAC units; one worker uses a tablet while another climbs a safety ladder on a commercial building.

Here are key steps property and facility managers can take to ensure compliance — and more importantly, to prevent injuries:

1. Install Non-Penetrating Guardrails

Non-penetrating guardrails protect exposed edges without compromising the roof membrane. They’re fully compliant with OHSA and CSA standards and can be adapted to almost any roof type.

2. Use Code-Compliant Access Ladders

Ensure fixed access ladders meet height extension requirements and include fall arrest systems where needed. Always secure them at both ends.

3. Add Roof Walkways and Crossovers

Walkways and crossovers bridges reduce slip hazards and guide safe foot traffic, especially around pipes, units, or uneven surfaces.

4. Conduct Regular Safety Audits

Skyline Group’s Onsite Sales Consultation Service provides onsite assessments to identify compliance gaps and recommend tailored solutions.

5. Educate Your Team

Skyline also offers Lunch & Learn sessions to train staff on rooftop risks, fall protection principles, and legal obligations.

Always Remember: 3 Meters is the Legal Tipping Point

3 meters is not a suggestion — it’s the legal tipping point where your responsibility begins. Whether you’re managing a healthcare facility, industrial roof or office building in Ontario, ignoring this threshold puts workers at risk and exposes you to serious legal and financial consequences.

Protect Your People, Company and Brand

Skyline Group is here to help you stay ahead of those risks with expert guidance, fully compliant systems and proven safety strategies. If you’re unsure about the current state of your rooftop safety — we’ll help you take the next step, confidently and compliantly. To get started, reach out to a safety expert or browse our full range of safety solutions.

The Impact of Poor Rooftop Safety on Liability and Insurance Costs in Ontario

In Ontario’s commercial property landscape, rooftop safety liability is a critical concern that directly influences both legal exposure and financial stability. Neglecting proper rooftop safety measures not only endangers workers, but also escalates workplace liability insurance premiums and invites severe legal consequences. In the latest learning resource from Skyline Group, we provide property managers and owners with the knowledge they need to adhere to Ontario rooftop safety regulations and liability standards.

Rooftop Safety Liability Ontario: Understanding Liability Risks for Property Owners

As per Ontario’s Occupational Health and Safety Act (OHSA), employers and property owners share responsibility for ensuring that all workers — including contractors — are protected from fall hazards when accessing or working on rooftops. This is clearly stated in OHSA’s Section 25(2)(h), which requires employers to “take every precaution reasonable in the circumstances for the protection of a worker”.

Common rooftop hazards that often lead to liability claims include:

  • Lack of guardrails or barriers around rooftop edges.
  • Inadequately protected skylights or hatches.
  • Unsecured ladders or poorly maintained access points.
  • Slippery walkways due to rain, snow, or algae buildup.
  • Cluttered rooftop surfaces creating trip hazards.

In the event of an accident, not only could a business be found in violation of OHSA, but Section 217.1 of the Criminal Code of Canada — implemented through the Westray Law — could also be applied to prosecute individuals for criminal negligence. For more information on the Westray Law and how it impacts you and your teams, our learning resource on the subject is a must-read.

While building a comprehensive understanding of Ontario’s provincial regulations is an imperative for any safety decision-maker, it is also important to be familiar with Canada’s national rooftop safety regulations. If you haven’t already downloaded our free whitepaper on this subject, we recommend doing so.

How Rooftop Safety Affects Insurance Costs

When it comes to workplace liability insurance, insurers carefully assess risk based on your safety infrastructure. Inadequate rooftop safety measures signal a higher likelihood of workplace incidents, leading to:

  • Increased insurance premiums
  • Stricter policy terms and deductibles
  • Reduced insurability or denied coverage in severe cases

The average cost of a fall-from-height claim in Ontario can exceed $59,000, not including reputational damage and legal fees. Multiple claims in a short time span can flag your organization as high-risk.

Meanwhile, a report from the Canadian Centre for Occupational Health and Safety (CCOHS) notes that slips, trips, and falls represent over 40% of lost-time injuries in Canada — many of which occur on rooftops or elevated platforms (source).

Best Practices for Reducing Rooftop Liability Risks

Two businessmen in a formal meeting discussing documents at a table, with eyeglasses and a clipboard in view.

Ensuring Compliance with Ontario Rooftop Safety Regulations

Adhering to provincial safety regulations is non-negotiable. Ontario’s regulations require robust safety measures for any rooftop with a fall hazard of over 3 metres. This includes compliant guardrails, secured access points, and safe working platforms.

Skyline Group offers a range of rooftop safety compliance solutions designed to align with Ontario’s regulations:

Regular inspections and maintenance of these systems are crucial. Utilizing services like Skyline Group’s Onsite Consultation Program can assist in identifying and rectifying compliance issues.

Employee Involvement and Accountability

Cultivating a culture of safety involves engaging employees in the process. Encouraging workers to report hazards and participate in safety training fosters a proactive environment. Implementing clear protocols and ensuring accountability at all levels reinforces the importance of rooftop safety compliance.

Implementing Proper Rooftop Safety Equipment

Investing in quality safety equipment is a tangible way to reduce risks. Top safety investments include:

  • Non-penetrating guardrails that preserve roof membranes.
  • Skylight protection screens to prevent fall-through risks.
  • Step-off platforms at ladder exits to eliminate transition hazards.
  • Bumplines and warning lines for visual hazard awareness.

All of these solutions are available through Skyline Group’s product portfolio and can be tailored to your rooftop’s unique needs.

Conducting Regular Safety Audits and Risk Assessments

Annual rooftop safety audits are crucial for identifying potential vulnerabilities and ensuring long-term compliance with Ontario’s safety regulations. Skyline Group’s comprehensive Rooftop Hazard Review Program provides a thorough assessment, including on-site visits to evaluate the existing safety measures. This program features detailed safety evaluations and generates reports outlining areas of concern and recommended improvements.

By conducting these audits, property owners can proactively address hazards, prevent accidents and mitigate liability risks. The insights gained from these audits allow for the development of targeted safety strategies, ensuring that all rooftop access points and working areas meet the required standards and provide a safe environment for workers.

Periodic assessments should also be carried out in addition to annual audits. These assessments should cover various aspects of rooftop safety, including the condition of guardrails, access points, and walking surfaces, as well as the effectiveness of existing safety protocols.

Providing Rooftop Safety Training for Workers

Equipping workers with the knowledge and skills to safely navigate rooftop environments, use ladders correctly, and operate fall protection systems is paramount. Skyline Group recognizes this need and offers tailored training programs, including “Lunch & Learn” sessions, designed to address specific team needs and regulatory requirements. These initiatives are some of the most effective ways to reduce rooftop liability risks, ensuring that employees are not only aware of potential dangers but also prepared to handle them effectively.

Case Studies: The Cost of Neglecting Rooftop Safety

The human cost of neglecting rooftop safety in Ontario is well documented. For instance, this event summary highlights incidents where fatalities have occurred as a result of poor safety protocols around the use of skylight systems. It is important to note that these are more than just statistics: they are real examples of individuals and families affected profoundly by avoidable accidents.

By contrast, Skyline Group’s project with Mohawk College is an example of proactive risk management. Our modular ladders, walkways and guardrails ensured safe rooftop access despite complex architectural challenges.

How Skyline Group Can Help Reduce Liability and Insurance Costs

Skyline Group is Ontario’s trusted expert in commercial property risk management as it pertains to rooftop safety compliance. We provide:

By working with us, you not only protect your team — you reduce your exposure to liability, demonstrate regulatory due diligence, and gain a competitive edge in your insurance negotiations. Schedule your free rooftop consultation today to start reducing rooftop safety liability in Ontario.

Liability & Insurance: Frequently Asked Questions

Neglecting rooftop safety opens property owners to lawsuits, WSIB claims, and regulatory fines under OHSA and the Criminal Code of Canada.

Yes. Unsafe rooftop conditions are red flags for insurers, leading to higher premiums or limited coverage.

Invest in guardrails, compliant ladders, scheduled audits, and hands-on training. Work with Skyline Group for turnkey solutions.

Elevate Your Safety Standards with Skyline Group

Speak with our rooftop safety experts today to ensure you’re fully aligned with evolving regulations. Explore our full range of solutions and take the next step towards total compliance.

The Working for Workers Six Act: What Does it Mean for You?

The Working for Workers Six Act, 2024 (Bill 229) represents a significant shift in Ontario’s employment and safety legislation. Enacted on December 19, 2024, this legislation introduces amendments that directly impact building owners and managers, particularly concerning workplace safety, liability and employee rights. Understanding these changes is crucial for ensuring compliance and maintaining a safe working environment.

Key Provisions of the Working for Workers Six Act, 2024

Bill 229 introduces several amendments to existing legislation, including the Employment Standards Act, 2000 (ESA), and the Occupational Health and Safety Act (OHSA). Some of the most notable changes include new entitlements of unpaid, job-protected leave when a child is placed in their custody through adoption or surrogacy. Aside from this, it also makes new provisions for long-term illness leave, aligning with upcoming federal changes to employment insurance benefits for adoptive and surrogate parents.

Beyond those provisions, Skyline Group are keen to make our customers aware of important changes regarding occupational health and safety measures, as well as increased penalties for safety violations:

  • Mandatory fitting of Personal Protective Equipment (PPE): Employers are required to ensure that PPE properly fits all workers, addressing diverse body types across all sectors.
  • Increased penalties for safety violations: Corporations convicted of a second or subsequent offence under the OHSA that results in the death or serious injury of one or more workers within a two-year period face a minimum fine of $500,000. 

The Implications for Building Owners and Managers in Ontario

As stewards of property and workplace environments, building owners and managers must navigate these legislative changes to mitigate risks and uphold safety standards. Key considerations include:

1. Ensuring Properly Fitting PPE

The mandate for properly fitting PPE necessitates a thorough review of current equipment and policies. Building managers must assess and update PPE to accommodate the diverse physical profiles of all workers, ensuring both safety and compliance. This includes collaborating with suppliers to source appropriate equipment and implementing training programs on correct usage.

2. Addressing Increased Liability and Penalties

The introduction of a minimum $500,000 fine for repeat safety violations underscores the importance of proactive safety management. Building owners and managers should:

  • Conduct regular safety audits: Identify and rectify potential hazards, particularly in high-risk areas such as rooftops and maintenance zones.
  • Implement comprehensive training programs: Ensure that all personnel, including contractors and temporary workers, are well-versed in safety protocols and emergency procedures.
  • Maintain detailed records: Document all safety measures, training sessions, and incident reports to demonstrate due diligence in the event of an inspection or legal inquiry.

How Skyline Group Can Assist

Navigating the complexities of the Working for Workers Six Act, 2024 requires expertise and proactive planning. Skyline Group specializes in providing comprehensive safety solutions tailored to the unique needs of building owners and managers in Ontario. Our services include:

  1. Onsite consultations: We conduct thorough evaluations of your property to identify potential hazards and recommend corrective actions, ensuring compliance with the latest legislative requirements.
  2. Customized training programs: Our team offers training sessions designed to educate your staff on proper safety protocols.
  3. Equipment solutions: We supply and install a range of safety equipment, including guardrails, access ladders, and rooftop safety systems, all designed to meet or exceed current safety standards.
  4. Policy development support: Skyline Group assists in crafting and updating safety policies and procedures, aligning them with new legal obligations and best practices.

The enactment of the Working for Workers Six Act, 2024 marks a pivotal moment in Ontario’s commitment to worker safety and rights. For building owners and managers, adapting to these changes is not only a legal obligation but also a moral imperative to protect those who work within their premises.

Proactive engagement with the new regulations, coupled with strategic partnerships with safety experts like Skyline Group, will be instrumental in fostering compliant, safe and resilient workplaces.

Skyline Group: Protecting Your People, Company and Brand

For more advice on navigating the complexities of this new legislation, our rooftop safety experts are here to help. To get started, reach out to one of our experts now. Alternatively, browse our full selection of learning resources around rooftop safety legislation in Canada.

A Facility Manager’s Guide to Roof Hatches in Ontario

Roof hatches play an essential role in commercial, industrial and institutional buildings, allowing access to rooftops for inspections, HVAC maintenance or equipment installations. However, unprotected hatches are among the leading fall hazards in Ontario workplaces, presenting severe risks to workers at height. That’s why we’ve created an extensive guide to roof hatches, exploring their safety risks, Ontario’s regulatory framework and practical solutions that help building owners and facility managers protect their teams.

Before we explore these rooftop features in detail, let’s look at some of the key statistics, and some of the human stories behind the real risks of roof hatches. A statistic we often highlight is that in 2022/23, 18 deaths in Ontario were caused by falls from height. While these fall take many forms and have many different causes, roof hatches are a major contributor to these statistics.

In one tragic case, a worker suffered serious injuries while preparing for a roofing job. Workers did not realize the plywood was being used to cover a hole that had been cut in the roof for mechanical services to the building. As they moved the plywood, one worker fell through the hole, approximately eight metres. While a roof hatch wasn’t in use, it draws us back to that key danger: an exposed opening on a flat roof without sufficient protection.

As with most rooftop safety risks, this could have been avoided with the correct approach to safety installations. But what risks are unique to roof hatches?

Understanding Roof Hatch Safety Risks

Open rooftop hatch with safety railings and ladder, providing secure roof access on a metal platform.

A poorly managed roof hatch is a major hazard. Without proper safeguards, workers can fall into the opening or off the roof, leading to severe injuries or fatalities. Below are the primary risks associated with roof hatches:

1. Fall Hazards Due to Open Roof Hatches

Open roof hatches pose a significant fall risk if not secured or protected by a guardrail system. Workers accessing or exiting the rooftop may lose balance and fall through the opening. It is crucial to consider that incidents involving unprotected hatches often result in severe injuries or fatalities.

2. Trip and Slip Risks Around Roof Hatches

Raised hatch curbs can create tripping hazards if workers are unaware of their presence. Meanwhile, wet, icy or snow-covered surfaces around the hatch increase slip risks, particularly in Ontario’s winter conditions. In darker seasons, poor visibility in low-light conditions further exacerbates trip risks. The risks here are numerous and highly significant.

3. Risks Associated with Unauthorized Access

Roof hatches that are not locked or secured properly can be accessed by unauthorized personnel, leading to safety breaches. This raises an important issue that you shouldn’t only consider the safety of your teams, but the security of your building. The two concepts go hand-in-hand. with potential vandalism or improper use of the hatch creating liability concerns for facility managers.

4. Improper Use of Ladders and Entry Points

Fixed ladders leading to roof hatches may lack sufficient safety features like handrails, anti-slip rungs or lifelines. The danger here is amplified when workers may be carrying heavy tools or equipment, reducing their ability to maintain three points of contact when using a ladder. From a broader perspective, hatch doors that do not open fully can obstruct entry and create awkward maneuvering, increasing fall risks.

5. Environmental Exposure and Weather-Related Risks

As a property owner or manager, you’ll understand that Ontario experiences extreme seasonal changes, affecting roof hatch safety. Winter conditions lead to ice buildup, making ladder rungs and surrounding areas dangerously slippery. Meanwhile, high winds can suddenly slam hatch covers shut, potentially trapping workers or causing head injuries.

How to Enhance Safety Around Roof Hatches

To minimize risks and ensure compliance, facility managers should implement a combination of engineered safety controls, procedural safeguards, and proper equipment:

  • Install roof hatch guardrails: One of the most effective ways to prevent falls around roof hatches is to install a guardrail system. A permanent or non-penetrating guardrail provides a protective barrier, ensuring workers are safe when entering or exiting the hatch. Skyline Group’s range of roof hatch guardrails are self-standing, with non-penetrating designs available. They comply with OHSA and Ontario Building Code and are easy to install without roof membrane damage.
  • Use self-closing safety gates: A self-closing gate ensures that the hatch opening is never left exposed, eliminating fall hazards when workers are transitioning between the ladder and the rooftop.
  • Use properly designed roof hatch ladders: Many safety incidents occur due to unsafe ladder access to roof hatches. Facility managers should ensure ladders are equipped with anti-slip rungs for better grip, fitted with lifeline systems to prevent falls and properly secured to avoid shifting or movement. Our selection of fixed access ladders are designed for seamless integration with roof hatches and are available with anti-slip rungs and fall arrest systems. Crucially, they also meet OHSA and OBC safety requirements.
  • Implement access control measures: Lockable roof hatches prevent unauthorized personnel from accessing the roof. Aside from taking this step, restricted keycard or keypad entry systems enhance security. As a final line of defense, surveillance cameras help monitor unauthorized access.
  • Conducting routine inspections and maintenance: You should regularly check for corrosion, wear and damage on hatches, ladders and guardrails. This includes ensuring hatch doors operate smoothly and remain securely fastened when closed. As a property owner or manager, you should schedule professional inspections at least twice a year, especially before winter.

Roof Hatch Safety: Skyline Group’s Success Stories

Skyline Group has a proven track record of delivering innovative, compliant, and highly effective roof hatch safety solutions for commercial buildings across Ontario. Below, we explore two of our standout success stories, demonstrating how our solutions have helped businesses overcome complex rooftop safety challenges.

Enhancing Safety and Compliance for a Walmart

Roof hatch with safety guardrail system and self-closing gate installed on flat commercial rooftop.

Walmart needed a safer way for maintenance teams to access the rooftop via a roof hatch while ensuring compliance with Ontario’s safety regulations. Skyline Group provided a comprehensive solution, including self-closing roof hatch safety gates, non-penetrating guardrails, and anti-slip walkways, significantly reducing fall risks. This upgrade ensured full compliance with workplace safety standards, protected workers, and maintained the integrity of the rooftop without requiring invasive modifications.

Safe and Efficient Interior Access for a Commercial Building

Aluminum vertical ladder leading up to a ceiling hatch in an indoor commercial or industrial setting, with safety marking tape visible around the hatch frame.

A commercial building required a secure interior rooftop access system to replace unsafe exterior ladders. Skyline Group installed a modular aluminum access ladder with a lockable roof hatch, along with perimeter guardrails and a self-closing safety gate to prevent falls. This solution eliminated weather-related hazards, allowed for safe equipment transport, and ensured compliance with Ontario’s OHSA rooftop safety requirements, ultimately streamlining maintenance operations and protecting workers.

Property Managers and Owners: The Responsibility is Yours

A proactive approach to roof hatch safety is critical, as waiting until an accident happens can lead to severe injuries, compliance violations, and costly legal consequences.

Beyond compliance, proactive investments in rooftop safety improve efficiency by reducing workplace disruptions and ensuring maintenance teams can work confidently. Solutions like perimeter guardrails, anti-slip walkways, and secure ladder access help create a safer environment, preventing accidents before they happen.

Skyline Group provides engineered rooftop safety solutions, helping Ontario’s property managers stay ahead of risks. Don’t wait for an incident – take proactive steps to protect your workers, your building, and your business.

Skyline Group: Protecting People, Companies & Brands

Ensuring safe access to your rooftop starts with the right protective measures. Don’t wait for an accident to highlight the risks: take proactive steps now. Skyline Group offers expert guidance and industry-leading solutions to keep your building compliant and your workers protected. Contact us today to discuss your roof hatch safety needs and implement the right solutions for your facility.

The Benefits of Anti-Slip Walkways and Rungs

For building owners and managers in Ontario, ensuring the safety of personnel accessing rooftops is a primary concern. At Skyline Group, we’ve found that one of the most effective ways to mitigate rooftop safety risks is through the implementation of anti-slip walkways and rungs. In this brief guide for safety decision-makers, we explore these essential products; their compliance benefits under Ontario’s regulations and how our own solutions can help create a safer elevated working environment.

Fact: slip-and-fall incidents are among the leading causes of workplace injuries in Canada. Anti-slip walkways and rungs significantly reduce the likelihood of these incidents. Beyond meeting that essential objective, anti-slip solutions also help ensure compliance with Ontario’s stringent height safety regulations, preventing costly legal liabilities and fines.

But why are they so essential? Let’s take a look at the numbers to find out.

Slip & Fall Accidents in Canada: An Avoidable Risk

According to the Canadian Centre for Occupational Health and Safety (CCOHS), over 42,000 workers are injured annually due to falls, with approximately 67% of these resulting from slips and trips on the same level. In British Columbia alone, nearly 41,000 workers suffered slip, trip, and fall injuries over a six-year period, leading to significant economic impacts, including 440,000 lost workdays and over $148 million in claim costs each year.

For your organization and your brand, the consequences of these accidents are significant. From a human perspective, the consequences can be tragic. Behind each and every one of these figures is a real story of loss and injury, underscoring the critical importance of proactive measures to prevent slip-and-fall accidents, particularly in environments like rooftops where the risk is elevated.

Anti-Slip Features: What Does the Law Say in Ontario?

Before we get into the details of these products, let’s take a closer look at what Ontario’s provincial regulations require from you as a property manager or owner. There are specific regulations relating to working at height, including requirements for safe access, fall protection, and slip prevention:

1. Occupational Health and Safety Act (OHSA)

Under Ontario’s OHSA, employers are responsible for ensuring a safe work environment, including safe rooftop access. The law mandates that workers at height (above 3 meters) must be provided with fall protection.

2. Ontario’s Industrial Establishments Regulation (R.R.O. 1990, Reg. 851)

This regulation requires walkways, ramps and ladders to be slip-resistant and structurally sound. It also specifies that areas where workers may be exposed to fall hazards must have adequate safeguards, such as guardrails or covers over openings.

3. Building Code Act (O. Reg. 332/12)

This legislation stipulates that rooftop access systems must be designed to prevent falls and provide stable walking surfaces. It also includes provisions for guardrails, roof access ladders and secure anti-slip pathways.

Failure to comply with these regulations can result in heavy fines, work stoppages, and legal consequences. By implementing anti-slip walkways and rungs, building owners reduce liability, enhance compliance, and create a safer rooftop environment.

How Do Anti-Slip Walkways and Rungs Enhance Safety?

Anti-slip walkways and rungs serve as a vital line of defense against some of the most common safety risks we see here at Skyline Group. Their benefits are significant from a safety and compliance standpoint; from improved stability and traction to protection against weather conditions, boosting worker confidence and the long-term savings they often provide.

Let’s take a look at these core benefits in closer detail:

  • Improved stability & traction: Rooftop surfaces are prone to moisture buildup, ice formation and debris accumulation, increasing the risk of slips. Anti-slip walkways provide a designated, stable pathway, reducing exposure to hazardous surfaces. Meanwhile, non-slip rungs on ladders ensure firm footing, reducing accidents when climbing.
  • Protection against weather conditions: Ontario experiences harsh winters, heavy rainfall and rapid freeze-thaw cycles, creating extremely slippery rooftop conditions. Anti-slip solutions help mitigate ice buildup, which is a major slip hazard. They also mitigate the pooling of rainwater, which can create slick surfaces. Beyond these advantages, they also reduce the risk presented by fallen leaves and debris, which reduce traction.
  • Compliance with Ontario safety regulations: Installing anti-slip walkways and rungs aligns with Ontario’s regulatory requirements, ensuring safe access and preventing workplace injuries. For more advice on Ontario’s regulatory requirements, our free resource on this subject is a must-read for property owners, managers and their maintenance teams.
  • Increased worker confidence: A safer work environment enhances worker confidence, allowing maintenance teams to perform tasks efficiently without fear of slipping or falling. These products aren’t just a safety essential: they’re a productivity and efficiency bonus.
  • Long-term cost savings: Preventing accidents reduces liability risks, potential workers’ compensation claims and operational downtime, saving thousands of dollars annually. Always remember that while safety is a moral and legal imperative, it also makes sense for your bottom line.

Skyline Group: A Look at Our Anti-Slip Walkways & Rungs

Skyline Group offers a range of solutions designed to meet Ontario’s rooftop safety requirements, ensuring maximum slip prevention and compliance:

  • Highly durable, corrosion-resistant, and lightweight.
  • Provides a clearly defined walking path, reducing the risk of slips.
  • Designed for year-round use, ensuring safe rooftop access in all seasons.
  • Equipped with serrated rungs for enhanced grip.
  • Constructed from durable aluminum, resistant to corrosion.
  • Available with lifeline attachments, ensuring additional fall protection.
  • Provides a secure barrier without damaging the roof membrane.
  • Ideal for protecting workers around rooftop edges and openings.
  • Meets Ontario’s OHSA fall protection standards.

Skyline Group: Elevated Safety, The Trusted Choice

Don’t wait for an accident to highlight safety gaps – upgrade your rooftop access with anti-slip walkways and rungs today. Schedule a consultation with Skyline Group to assess your needs and explore compliant, high-quality safety solutions.

How to Create an All-Year-Round Rooftop Safety Strategy in Ontario

For building owners and managers across Ontario, taking a reactive rather than proactive approach to rooftop safety presents inherent risks. Creating a strategy that protects workers and maintenance teams all-year-round isn’t just a recommendation, but a necessity underlined by the province’s stringent safety regulations. In a comprehensive learning resource from Skyline Group, we outline the essential steps that can be taken to create a strategy that goes beyond compliance across all seasons of the year.

Time and time again, we see instances of organizations who don’t recognize the importance of an all-year round safety strategy until it’s too late. The consequences are often tragic, and here at Skyline Group, we refer to that misguided approach as “discovering safety by accident”. But what do we really mean by taking a reactive approach to safety, rather than a proactive approach?

Rooftop Safety: The Dangers of a Reactive Approach

Here’s just a few examples of approaches that highlight the dangers of a reactive approach:

  • Waiting for an accident to happen: A building manager may delay in installing a guardrail around a roof edge, reasoning that their facilities team is careful and experienced. When an accident does happen, there is a scramble to implement fall protection solutions. By taking a proactive and preventative approach, injuries, costly lawsuits, regulatory fines and damaged reputation all could have been avoided.
  • Maintaining equipment only when it fails: Let’s look at an example where access ladders are only inspected after a worker reports instability. Upon inspection, it could be discovered that corrosion has caused the ladder to weaken. This delay could have resulted in catastrophic failure, risking severe injury or risk to life. In any case, it will result in disrupted operations and higher emergency repair costs.
  • Ignoring seasonal hazards: As an example, a property owner could fail to prepare their rooftop for winter conditions, assuming that workers will be careful. In the event that a contractor slips or falls after heavy snowfall, that property owner will be held liable for any injury. Additionally, emergency snow removal and retrofitting anti-slip solutions can become urgent and costly.

These are only a few examples of how a reactive approach to safety can risk tragic consequences, as well as irreversible damage to your company and brand. In the next section, we outline the correct, proactive approach to creating an all-year-round rooftop safety strategy.

Adopting an All-Year Round Approach

The foundation of your all-year-round safety approach in Ontario should begin with a full understanding of the legislation you must follow.

Always remember: Ontario’s rooftop safety legislation applies to all seasons of the year. In order to go beyond compliance and ensure genuine protection for workers at height, you must ensure your approach sees the below regulations as starting points:

  • Construction Projects (O. Reg. 213/91): Includes specific requirements for fall protection systems, safety procedures, and ladder use when working at heights of 3 metres or more.
  • Industrial Establishments (Reg. 851): Outlines rules for safe access, including ladder safety and the requirement for guardrails and protective barriers around rooftop edges or openings.
  • Ontario Building Code: Establishes design standards for rooftop access points like hatches and ladders to ensure safety and compliance.

1. Winter: Protecting Against Ice, Snow and Wind

Frost-covered flat rooftop with three large vertical ventilation ducts, photographed on a clear winter morning with urban buildings in the background.

Building owners and managers in Ontario will understand only too well how harsh the province’s winter season can be. This part of Canada experiences heavy snow and ice accumulation throughout the season, drastically increasing the risk of slips, trips and falls. Beyond that, strong winds can easily destabilize workers and their equipment, presenting significant risks to themselves and others at lower levels.

Below, we’ve listed some key measures that should receive extra attention in the winter season:

  • Snow removal plans: Create a snow and ice management strategy, including professional removal services and heated walkways where feasible.
  • Anti-slip solutions: Install aluminium walkways with serrated surfaces to prevent slips on icy surfaces. Skyline Group’s walkways are designed to maintain traction in extreme weather conditions.
  • Guardrails & bumplines: Non-penetrating Skyline guardrails provide secure barriers against roof edges, preventing accidental falls when visibility is reduced.
  • Wind considerations: Use tie-off points and personal fall arrest systems (PFAS) to stabilise workers during high-wind conditions.

2. Spring: Dealing with Rain and Melting Ice

After the harsh winter, property managers and owners in Ontario will often experience fluctuating temperatures, rain and melting snow on their rooftops. These conditions can create slippery surfaces and expose structural vulnerabilities caused by winter conditions. The steps below can be included in your all-year-round safety protocol:

  • Inspect for damage: Perform a thorough spring inspection to identify roof damage caused by winter weather, including cracks, loose materials, and compromised anchors.
  • Warning line systems: Install Skyline RoofLine systems to create controlled zones for workers to navigate safely around hazardous areas.
  • Ladder inspections: Check all access ladders for corrosion, loose fittings, or structural integrity issues caused by repeated freeze-thaw cycles.

3. Summer: Managing Heat and Increased Activity

Construction worker shielding eyes from the sun at sunset, wearing a high-visibility vest and standing outdoors with a view of distant hills.

For many organizations, rooftops typically experience increased footfall during the summer months. This may be in order to accommodate any building work, or essential maintenance tasks that can’t be completed at other times of year. From a safety perspective, the challenges of this season shouldn’t be underestimated, with sun glare and safe access to be given special consideration.

  • Sun protection: Equip workers with UV-resistant clothing and ensure water stations are available to prevent dehydration and heat exhaustion.
  • Clear pathways: Keep rooftops free of clutter by organising tools and materials using secure storage solutions.
  • Elevated platforms: Use crossover bridges and platforms to provide safe access over obstacles like HVAC units, ensuring clear movement pathways in high-traffic areas.
  • Regular maintenance: Summer is an ideal time to repair or replace damaged rooftop safety systems. Consider upgrading guardrails, hatches, and ladders to Skyline Group’s modular, low-maintenance solutions.

4. Fall: Preparing for Challenges Ahead

As the year progresses, autumn provides an opportunity to prepare for winter while managing seasonal risks like wet leaves and increased rainfall. It also provides an ideal opportunity to begin preparing for any winter rooftop safety inspections you may have planned. Below, we’ve listed some key steps that are relevant to the fall season:

  • Gutter maintenance: Ensure rooftop drainage systems are clear of leaves and debris to prevent water pooling and ice formation.
  • Roof hatch safety: Install roof hatch guardrails to secure access points and prevent falls when transitioning from ladders to rooftops. For comprehensive guidance on roof hatch safety, consult our free learning resource.
  • Seasonal safety training: Conduct refresher courses for rooftop workers, focusing on the specific risks they may encounter during the colder months.
  • Equipment upgrades: Inspect and upgrade safety solutions to ensure they can withstand freezing temperatures and heavy snow loads.

Best Practices for Compliance and Safety Year-Round

It is important to note that the steps above should not be taken in isolation. The fact is that your approach – regardless of the season – should prioritize regular inspections, comprehensive training, high-quality equipment, and staying informed on evolving legislation.

Conducting routine inspections is essential to identifying and addressing hazards before they escalate into serious risks. Scheduled rooftop safety audits should be performed consistently, with a focus on wear and tear on ladders, guardrails, and other critical safety systems.

Beyond inspections, comprehensive training for rooftop workers is crucial. Workers must be well-versed in the proper use of safety equipment, hazard identification, and emergency response protocols. Training should not be static; it must be updated seasonally to reflect the unique challenges posed by changing weather conditions, such as icy surfaces in winter or strong winds in spring. Regular refreshers ensure that teams are prepared for any scenario, reducing the likelihood of accidents caused by inadequate knowledge or improper equipment use.

Female supervisor giving a safety briefing to a group of construction workers in high-visibility vests during a meeting around a conference table.

Investing in high-quality safety equipment is another fundamental component of maintaining rooftop safety year-round. Durable, regulation-compliant safety solutions, such as non-penetrating guardrails and lifeline ladders, play a vital role in minimizing risk. Ontario’s demanding climate requires equipment that can withstand extreme temperatures, heavy snow loads, and high winds without compromising worker safety.

Finally, staying informed on legislation is a responsibility that building owners and managers cannot afford to overlook. Ontario’s Occupational Health and Safety Act (OHSA) and provincial building codes are subject to periodic updates, and maintaining compliance requires a thorough understanding of these changes. Keeping up with evolving regulations ensures that rooftop safety strategies remain aligned with legal requirements, preventing costly fines and liability issues.

By adopting these best practices, property managers can create a culture of safety that protects workers, minimizes risks, and reinforces their commitment to regulatory compliance throughout the year.

Skyline Group: Protecting People, Companies and Brands

Here at Skyline Group, we are more than just a safety solution provider: we’re the trusted North American choice for safe elevated work areas. To transform safety levels on your rooftop, get started by browsing our safety solutions. Alternatively, book an On-Site Consultation or request a quote.

The Quick Guide to Expert Ladder Maintenance

Regardless of the nature, size or complexity of your rooftop, access ladders can play a critical role in your building’s safety. This is especially true in commercial and industrial buildings in Ontario where rooftop access is a routine requirement for maintenance, inspections and installations. In the latest learning resource from Skyline Group, we provide building managers and owners with the essential insights they need to to understand regulatory compliance and best practice for ladder maintenance.

For building owners and managers in Ontario and beyond, ensuring the safety and compliance of these ladders is both a legal and moral imperative. Poorly maintained ladders can lead to accidents, liability concerns and even violations of the Occupational Health and Safety Act (OHSA), which can lead to criminal fines and even imprisonment.

Ladder Maintenance: Understanding Ontario’s Regulations

In Ontario, access ladders fall under the remit of several regulations, primarily the Occupational Health & Safety Act as mentioned above, and the Construction Projects Regulation (O. Reg. 213/91). While it is important to familiarize yourself with the specific requirements mandated by both pieces of legislation, we’ve captured some of the key stipulations:

  • Safe condition: Ladders must be free from defects, damage, or conditions that could compromise their safety.
  • Inspection: Regular inspections are mandatory, ensuring the ladder remains fit for use. Specific inspection frequencies depend on the nature of use and the worksite environment.
  • Proper usage: Ladders must meet design and performance standards, including CSA standards for portable ladders and fixed ladders.
  • Anchorage and stability: Fixed ladders must be securely attached to prevent movement, while portable ladders must rest on stable surfaces.

In the next section, we outline the key steps your facilities and maintenance teams should take to ensure ladder safety and compliance with the regulations listed above.

How to Approach Ladder Maintenance in Your Building

Your approach should include two key considerations: a comprehensive ladder maintenance plan & schedule, and a checklist approach in terms of issues to identify and resolve.

Creating a Comprehensive Ladder Maintenance Plan

An effective maintenance plan is crucial for ensuring ladder safety and compliance. Building owners and managers in Ontario should follow these steps:

  • Document maintenance procedures: Maintain a detailed log of all inspections and maintenance activities. This log should include dates, inspection results, and any corrective actions taken.
  • Schedule regular maintenance: Perform routine inspections based on ladder usage. For high-use ladders, inspect weekly or monthly; for less frequently used ladders, inspect quarterly.
  • Train personnel: Ensure maintenance teams are trained in ladder inspection protocols and know how to identify potential hazards.
  • Replace worn components: Immediately replace any damaged or worn parts. For fixed ladders, consult manufacturers for compatible replacement parts.
  • Engage professional services: Work with safety experts like Skyline Group to conduct comprehensive rooftop safety assessments and ladder inspections.

What to Look for During Ladder Maintenance:

Below, we’ve created a checklist of issues your teams should be looking for during ladder inspections:

  • Structural integrity: Check for bends, cracks, or deformities in the ladder’s rungs, rails, and supports. Additionally, examine joints and welds for signs of weakening or stress fractures.
  • Corrosion and wear: Inspect for rust, particularly in outdoor ladders exposed to harsh weather conditions. Your teams should also look for signs of wear on non-slip coatings or rung surfaces.
  • Hardware and fittings: Ensure bolts, screws, and other fasteners are tight and in good condition, and verify that ladder brackets and locks are functional and secure.
  • Safety features: Confirm that safety cages, guardrails, and lifeline anchors are properly installed and undamaged.Inspect the condition of non-slip feet and ensure stability during use.

The points listed above only provide a brief overview and should not inform your total approach to ladder safety. Indeed there are a number of other steps you can take to ensure your approach goes beyond compliance to achieve the highest levels of safety.

Beyond these steps, we also recommend exploring the possibility of applying non-slip coatings to ladder rungs to ensure safe footing in wet or icy conditions.

Skyline Group: Your Partner for Ladder Safety

Here at Skyline Group, we support building owners and managers in Ontario in ensuring their ladders go beyond basic compliance measures, taking every reasonable precaution to protect the lives of workers at height. To explore how we can help, book an Onsite Consultation. Alternatively, browse our full range of fully compliant access ladder solutions now.

NAVIGATING ONTARIO’S ROOFTOP SAFETY REGULATIONS

Free to download: an essential resource for building owners, facilities managers and safety decision-makers based in Ontario. When it comes to navigating Ontario’s complex rooftop and height safety regulations, this is a must-read.

In this comprehensively detailed guide, Skyline Group explores the strict regulatory frameworks around the protection of any individual accessing your rooftop. The whitepaper outlines the key legislation, and how the province’s specific regulations can be complied with using a combination of safety theory and the correct approach to safety infrastructure.

Printable and up-to-date with Ontario’s most-recent regulations, this resource covers the following areas and more:

  • Governing legislation and regulations around working at height in Ontario
  • Key statistics on height and roof safety in Ontario & beyond
  • Advice on implementing the Hierarchy of Controls
  • How to identify and mitigate height safety risks
  • Tips on specifying the right safety infrastructure for your rooftop

Accessing this definitive guide is easy. Simply submit your details in the contact form to the right, and we’ll be in touch with your free download link.

A Building Owner’s Guide to Roof Warning Line Systems in Ontario

Time and time again, we are given tragic reminders of the importance of rooftop safety in Ontario. The sad fact is that approximately 20 people die every year as a result of falls from height at work: a fact that underlines your responsibility to protect them as a building manager or owner. In the latest learning resource from Skyline Group, we explore one often overlooked means of changing these statistics for good – roof warning line systems.

It is positive to see that building owners and managers across Ontario and beyond are becoming increasingly aware of the risks associated with working at height. While awareness of this issue has improved over recent years, the fact remains that implementing robust safety measures isn’t just a regulatory requirement in Ontario: it’s a moral obligation.

Aside from the most common safety installations like guardrails, walkways, access ladders and crossover bridges, it is important to consider one of the often-overlooked solutions: warning line systems.

What are Warning Line Systems?

Among the safety solutions listed above, warning line systems stand out as practical and highly cost-effective solutions. But what are these products, and what do they do?

It’s simple: warning line systems serve as a visual guide to facilities and maintenance teams accessing your rooftop. They mark boundaries and safe zones, significantly reducing the risks of falls and other hazards. While they do not act as a physical barrier like guardrails, for example, they act as a proactive safety measure to both guide workers and alert them to hazardous areas, including roof edges.

How Can You Benefit from Warning Line Systems?

Physical barriers will always be the superior options when it comes to removing workers as far as possible from height safety risks. However, the onus is on you as a building owner or property manager to demonstrate that you have taken every reasonable precaution to make workers aware of those risks and those common danger zones. This is why providing visual warning signs is so crucial. Let’s take a closer look at the benefits these products can provide on your rooftop:

  • Visual hazard identification: Warning lines clearly delineate areas where workers can safely operate and where hazards such as roof edges, skylights, or fragile surfaces exist.
  • Regulatory compliance: In Ontario, safety regulations mandate that workers operating near unguarded roof edges must be protected by appropriate fall protection measures, including visual deterrents like warning lines. For more advice on safety regulations relevant to Ontario, click here.
  • Supplementary safety: They work as part of a broader safety strategy, complementing other systems such as guardrails, access ladders, and personal fall arrest systems.

Rooftop Warning Line Systems in Ontario

Before we get into the details of these solutions, let’s return to the subject of Ontario’s regulations in this area. The Ontario Occupational Health and Safety Act (OHSA) and associated regulations mandate stringent safety measures for work at heights.

Key requirements in this area outline that warning line systems must be placed at least 6 feet from roof edges to designate a safe work zone. Additionally, workers working beyond those warning lines must use personal fall arrest systems or similar protective measures. For more advice on personal fall arrest systems, be sure to consult two of our learning resources on this topic:

Applications of Warning Line Systems on Ontario' s Rooftops

Warning line systems are incredibly versatile and can be applied across a wide range of rooftop scenarios in Ontario. Below, we’ve listed just a few examples of environments where these solutions can lend significant safety value:

  • Construction projects: Temporary safety zones for contractors working near edges or hazardous equipment.
  • Maintenance work: Creating designated pathways for HVAC technicians, electricians, and cleaning crews to safely access rooftop equipment.
  • Skylight and roof hatch protection: Highlighting potential fall-through hazards, especially in low visibility conditions like snow or rain.
  • Equipment isolation: Preventing unauthorized access to sensitive machinery or hazardous rooftop zones.

Of course, there are a number of steps you should take before implementing these systems on your rooftop. Firstly, you should conduct a comprehensive roof safety audit, identifying all potential hazards, including roof edges, fragile surfaces and equipment zones. Secondly, you should carefully adhere to Ontario’s established placement guidelines, which mandate that warning lines are set at least 6 feet from the edge of a roof.

To maximize the potential of these products, they should be combined with other safety solutions. As they are not a standalone solution, they should be paired with guardrails, personal fall arrest systems and safe access ladders to ensure comprehensive safety coverage.

Finally, your workers should be trained on the proper use of these systems – another guideline that is stipulated in Ontario’s Occupational Health and Safety Act. You should educate your teams on their purpose and proper use, ensuring that warning lines are inspected and maintained regularly for wear and tear – especially following extreme weather conditions.

Introducing RoofLine Warning Systems: The Choice of Building Managers and Owners in Ontario

Roofline Bumpline

Skyline Group’s RoofLine Series represents the pinnacle of rooftop safety solutions, offering a non-intrusive, durable, and highly visible system designed to mark rooftop safe zones effectively. Here’s a brief overview of the features offered by our selection of RoofLine Warning Systems:

  • Self-ballasted design: Eliminates the need for roof penetration, preserving the structural integrity and preventing potential leaks. Aside from this, they are ideal for buildings where roof warranties prohibit penetrative installations.
  • High-visibility materials: Bright, weather-resistant flags and lines ensure visibility in various weather conditions, from snowstorms to heavy rain.
  • Modular configuration: Adaptable to different rooftop layouts, making it suitable for complex or irregular roof designs.
  • Durability: Designed to withstand Ontario’s harsh weather conditions, including heavy snow, rain, and strong winds.
  • Compliance-oriented: Meets or exceeds Ontario’s workplace safety regulations, offering peace of mind to building owners and managers.

Rooftop safety is non-negotiable for building owners and managers in Ontario. Warning line systems like Skyline Group’s RoofLine Series provide an essential layer of protection, marking safe zones and reducing fall risks without compromising roof integrity. When combined with other safety measures and backed by worker training, these systems create a robust safety framework that ensures compliance and peace of mind.

Skyline: Protecting Your People, Company and Brand

Here at Skyline Group, we bring together decades of combined experience to protect your people, company and brand. To find out more about how we can help you go beyond compliance to the highest levels of safety, contact us today to organize a free onsite sales consultation. Alternatively, browse our full range of products now.

How to Prepare for Winter Rooftop Inspection in Ontario

If you’re a building manager or building owner in Ontario, it’s likely that you’ll be one of thousands of professionals preparing for a winter rooftop inspection. While these inspections are essential in maintaining compliance with Ontario’s provincial regulations and protecting the wellbeing of maintenance personnel, they can also come with their own challenges that you should be fully prepared for. In the latest learning resource from Skyline Group, we explore the necessary considerations and steps you should take to ensure your rooftop is ready to pass at inspection.

Before we get into the details, let’s explore some of the key regulatory frameworks you should be aware of prior to your winter rooftop inspection. While regulations can be complex in nature, differing from province to province, two frameworks should largely form your approach: the Occupational Health and Safety Act (OHSA) and the Ontario Building Code (OBC).

An Overview of Ontario’s Key Regulatory Framework

In Ontario, the Occupational Health and Safety Act (OHSA) serves as the primary legislation governing workplace health and safety. The OHSA mandates that employers take every reasonable precaution to protect workers, which includes ensuring safe access to and from rooftops, especially during hazardous winter conditions. For an extensive guide to maintaining rooftops in hazardous winter conditions, we recommend consulting our expert learning resource on the topic.

Beyond the OHSA, the Ontario Building Code (OBC) sets out technical and administrative requirements for building construction and maintenance, including aspects related to rooftop safety. Building owners and managers in Ontario should always have this information readily available.

Key Steps to Prepare for a Winter Inspection: A Checklist

The steps below represent a checklist, and do not guarantee compliance on your rooftop. However, following this advice will ensure that you are broadly in-line with the requirements set out in the regulations mentioned above:

1. Conduct a Comprehensive Risk Assessment

Before winter sets in, perform a thorough risk assessment of your rooftop. Identify potential hazards such as:

  • Structural weaknesses: Inspect for signs of wear and tear that could be exacerbated by snow and ice accumulation.
  • Slip and fall hazards: Look for areas prone to ice formation or water pooling.
  • Access points: Ensure ladders, hatches, and other access points are secure and in good condition.

Engaging a professional in this area can provide an objective evaluation and help in identifying less obvious risks. To find out how Skyline Group can help, book an Onsite Consultation at the earliest opportunity.

2. Ensure Proper Snow and Ice Management

The dangers of snow and ice are well understood, heightening the risks of slips, trips and falls. However, it’s also important to note that excessive snow and ice can compromise the integrity of the rooftop itself, presenting its own set of unique safety risks. With these challenges in-mind, you should implement a snow and ice removal plan that includes:

  • Regular monitoring: Schedule frequent inspections to assess snow and ice buildup.
  • Safe removal practices: Use appropriate tools and techniques to avoid damaging the roof surface. Avoid sharp tools that could harm the roofing material; instead, use plastic shovels or snow rakes designed for rooftop use. 

It is also important to consider the impact of snow and ice on drainage systems, including guttering and downspouts. When preparing for a winter rooftop inspection in Ontario, you should ensure that gutters and downspits are clear of debris and correctly functioning. Meanwhile, drains should be inspected and maintained to prevent blockages via ice dams, as well as water infiltration.

3. Implement Fall Protection Measures

Fall protection is critical when personnel access the rooftop. Ensure compliance with Ontario regulations by:

  • Installing guardrails: Permanent or temporary guardrails can provide effective fall protection.
  • Providing PPE and training: Ensure workers have and use appropriate PPE, such as harnesses and lanyards. Meanwhile, it is crucial to remember that training workers on the proper use of fall protection equipment is also a legal requirement under the OHSA.

This list is, of course, not exhaustive, and there are a range of other fall protection measures available. Depending on the nature of your rooftop and the level of access required by your facilities and maintenance teams, you can enhance your fall protection strategy by considering other solutions such as walkways, crossover bridges and safe access ladders.

Safety Through Knowledge

As we conclude this learning resource, we’d like to highlight that your rooftop safety inspector will not be approaching your inspection as a mere box-ticking exercise. Simply installing rooftop safety solutions and fall protection systems won’t guarantee that your rooftop will pass. This is why it is absolutely critical to familiarize yourself with safety regulations that are specifically relevant to Ontario. Before you take action, you can read about some of those regulations here.

Finally, and most importantly, remember this: there’s more to protecting lives than merely passing a rooftop safety inspection. As a building owner or manager, the responsibility lies with you to ensure that all people who rely on the safety of your rooftop get home safely at the end of the day. That means taking every reasonable precaution to do that, going beyond compliance to achieve true levels of safety. That’s where working with Skyline Group can help. See below for contact information, and reach out to us for more.

Prepare for Your Rooftop Inspection with Skyline Group

Are you a building manager or owner currently preparing for a rooftop safety inspection in Ontario? If so, we can help. Our expert safety consultants provide onsite sales consultations, helping you identify any issues that may present a risk of inspection failure. To get started, book your consultation now or reach out to us to discuss the unique requirements of your rooftop.

roof railing

TÉLÉCHARGER

Ce site est protégé par reCAPTCHA et le Google Politique de confidentialité et Conditions d’utilisation  appliquer.
roof railing

DOWNLOAD

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

DOWNLOAD

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

DOWNLOAD

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.